Prosthetic Drivers

For Friadent, 3i, and BioHorizons – Shaft length is 12.7mm .

For Friadent, 3i, and BioHorizons – Shaft length is 6.4mm .

For Friadent, 3i, and BioHorizons – Shaft length is 12.7mm .

For Friadent, 3i, and BioHorizons – Shaft length is 6.4mm .

For Friadent - Shaft length is 12.7mm .

For Friadent – Shaft length is 6.4mm.

For 3i – Shaft length is 12.7mm .

For 3i – Shaft length is 6.4mm.

For Friadent, Noble, and Keystone – Shaft length is 12.7mm .

For Friadent, Noble, and Keystone – Shaft length is 6.4mm .

This is a prosthetic parts driver for low speed latch contra angle handpieces used for 3i prosthetics.

For Implant Depot, Zimmer, BioHorizons, Astra, Camlog, and Innova – Short shaft 6.4mm long .

For Implant Depot, Zimmer, BioHorizons, Astra, Camlog, and Innova – Short shaft 6.4mm long .

For Implant Depot, Zimmer, BioHorizons, Astra, Camlog, and Innova – Long shaft 12.7mm.

For Implant Depot, Zimmer, BioHorizons, Astra, Camlog, and Innova – Short shaft 6.4mm long .

This is a prosthetic parts driver for low speed latch contra angle handpieces and can be used for any of Implant Depot's implants as well as Zimmer, BioHorizons, and other internal hex systems.

A contra angle/ latch style 1.25mmD [050] hex driver fits into a hex style ratchet or torque wrench. It can be used on our cover screws, healing abutments, final abutment screws, etc. Learn More

Extends the driver 3/8 th's of inch connects into manual knob, ratchet, or torque wrench.

Extends the driver 5/8 th's of inch connects into manual knob, ratchet, or torque wrench .

The implant mount driver for contra angle fits over the implant mount for removal from the vial and placement into the osteotomy.

Latch to Square Adapter .

A long length 1.25mmD [050] hex driver fits into a hex style ratchet or 4x4 torque wrench. It can be used on our cover screws, healing abutments, final abutment screws, etc.

Star Driver For NobelBiocare, Unigrip Screw - Long Shaft 12.7mm .

Star Driver For Nobel Biocare, Unigrip Screw - Short Shaft 6.4mm .

Converts existing Nobel torque wrench into a universal torque wrench so that any implant driver can be utilized.

A short length 1.25mmD [050] hex driver fits into a hex style ratchet or torque wrench. It can be used on our cover screws, healing abutments, final abutment screws, etc.

ITI Driver For Straumann/ITI - Long Shaft 12.7mm .

ITI Driver For Straumann/ITI, 3I - Short Shaft 6.4mm .

Converts existing ITI Straumann torque wrench into a universal torque wrench so that any implant driver can be utilized.